Over the weekend DDOT sent out its latest "
Eleventh Street Ledger," the official newsletter of the
11th Street Bridges project. It gives a pretty detailed update on the progress made over the past few months on surrounding infrastructure and the two new "freeway bridges," the inbound one of which now has 48 of its 54 girders set, with the outbound girders soon to follow. These two bridges will be opening in the fall, with the two-way "11th Street Local" bridge expected to open a year after that.
You can
read the newsletter for all the information, but it does say (page 2) that coming soon in the 11th/12th/M/N/O corridor on the Near Southeast side of things will be the first of four new piers north of M to connect the new inbound freeway bridge to the existing freeway, and that this summer steel girders for the ramp will be placed above M Street. And the girders of the inbound bridge will soon be set to connect the new bridge itself to the northwest side of the river.
There is also a graphic on page 5 detailing the ramps and right-of-ways that would be built in a later, currently unfunded phase of the project, with the bulk of the additional work to be done where the freeway curves at 11th Street. There would be a new wider flyover to take outbound traffic to the bridges; there also would be a change in the current Pennsylvania Avenue approach with a new ramp down to 11th Street, where drivers would go through a streetlight-controlled intersection to either turn left or right on 11th or continue forward toward Pennsylvania Avenue on the new "Southeast Boulevard" (which is what drivers know today as the below-grade route to and from Pennsylvania Avenue and Barney Circle). There would also be new approaches north of M between 11th and 12th to take drivers exiting off the inbound freeway bridge up to Southeast Blvd., where they could turn either left to get to 11th Street or right to go to Pennsylvania Avenue.
These additional routes were all called for
in the EIS, but if you came in after the
design/build phase of the bridges got underway, you might be unfamiliar with these other connections that DDOT hopes to eventually add, which will make the intersection of 11th Street and Southeast Blvd. quite a happening juncture. This intersection will actually get its start during the bridge's first phase, as within a few years there will be a new ramp allowing northbound traffic on 11th Street to turn left and enter the Southeast Freeway--no more zooming down Virginia Avenue for eight blocks to the 3rd Street ramp. And traffic coming from Pennsylvania Avenue on the first iteration of Southeast Blvd. will be brought to this new 11th Street intersection as well.
The
NCPC document also says (page 8) that the path on the local bridge for cyclists and pedestrians has been widened in the final design to 16 feet from 14 feet. And the design is still configured to allow for streetcars to run on the local bridge in shared lanes, with lighting fixtures and other design elements configured for overhead wires, should they be necessary.